Fire shutter Fire 4000
Type RGS EW 60, RGS EW 90 & RGS EW120
This Fire 4000 Fire shutter is an excellent solution for fireproof closing or dividing rooms.
This Fire shutter is highly suitable for everyday use and situations where low to medium fire resistance is required.
Tested EW 60-C2, EW 90-C2 and EW 120-C2.
Tested according to EN 1634-1 and classified according to EN 13501-2.
CE marking in accordance with EN 16034.
Maximum sizes
EW 60
Width: 8,000 mm.
Height: 8,000 mm.
Area: 64 m2
EW 90
Width: 8,000 mm.
Height: 8,000 mm.
Area: 64 m2
EW 120
Width: 8,000 mm.
Height: 8,000 mm.
Area: 10 m2
Mounting only possible on wall/opening
Permitted mounting surfaces: aerated concrete, sand-lime brick, concrete, masonry, fire-resistant steel construction, reinforced metal stud wall (through and through installation mandatory for fire resistance > 120 minutes
Gravity failsafe is included as standard
Gravity failsafe chain wheel drive 400 V incl. control box with integrated battery gravity failsafe tube motor 230 V incl. control box (up to ± 4 m2) optical/acoustic signaling
Fire shutter Requires annual statutory inspection
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
Downloads
-
Double-walled galvanized steel slats of 0.80 mm thickness - total thickness 22 mm and height 100 mm. The cavity is filled with promapyr mineral wool.
-
Supplied with a galvanized surface as standard, but can be powder coated in any RAL color.
When powder coating the Venetian blind mat, wear marks may occur due to the weight and therefore cannot be guaranteed.
Also available with stainless steel surface in AISI 304 and 316.
-
130-160 x 54 mm galvanized steel with fire expanding material.
-
EW 60
Width: 8,000 mm.
Height: 8,000 mm.
Area: 64 m2EW 90
Width: 8,000 mm.
Height: 8,000 mm.
Area: 64 m2EW 120
Width: 8,000 mm.
Height: 8,000 mm.
Area: 10 m2 -
22.5 kg/m2
-
1.25 mm galvanized steel sheet. Dimensioned on a case-by-case basis depending on blind height and width.
-
230V tube motor or 400V box motor with safety brake and control box. The motors come with a Failsafe system, which means that the blind automatically rolls down in the event of a power failure.
-
ABA or ABDL system. Daily operation with key switch or code switch.
-
Blinds are always installed as surface-mounted. It is assumed that there is a solid and suitable building component as a fastening base from the opening and 130 mm in on both sides and throughout the height of the blind.
-
- Annual statutory inspection by a service company.
- Functional testing of engine, steering and safety equipment.
- Check suspension, fasteners and slats for damage.
- Tightening of moving parts.
- Clean guide rails and, if necessary, lubricate bearings and sliding brackets.
-
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Related products
Fire shutter Fire 5000 Type RGC EI2 60
This Fire 5000 Fire shutter is an excellent solution for fire-resistant closure or partitioning of rooms. Partly thanks to its high fire resistance of 60 minutes, this Fire shutter is extremely suitable for situations where high fire resistance is required.
Fire shutter Fire 4000 Type RGS EW 60, EW 90 & EW120
This Fire 4000 Fire shutter is an excellent solution for fireproof closing or dividing rooms. This Fire shutter is highly suitable for everyday use and situations where low to medium fire resistance is required.
Fire Curtain Fire 5000 Type RGT EI2 60 & EI2 120
A heat-insulating fire protection that reduces heat radiation to a minimum. The temperature on the surface of the fire curtain can be kept lower than 140° for a minimum of 30 minutes. The compact and solid design of the fire curtain can be easily integrated into both ceilings and frames.